...
...
...
...
...
...
...
...
...
...
den Allplan Webservices anmelden Anchor |
---|
| In Allplan bei Bimplus anmelden |
---|
| In Allplan bei Bimplus anmelden |
---|
|
Um Daten von Allplan aus direkt nach Bimplus hochladen zu können, müssen Sie |
...
bei den Allplan Webservices angemeldet sein. Die hierfür erforderlichen Zugangsdaten erhalten Sie nach erfolgter Registrierung bei Bimplus. |
...
...
...
einen Allplan Arbeitsplatz und die Anmeldung |
|
...
...
Webportal BIMPLUS sind identisch. Haben Sie sich |
|
...
bereits über das Webportal BIMPLUS bei den Allplan Webservices angemeldet, müssen Sie sich nicht erneut über Ihren Allplan Arbeitsplatz anmelden und umgekehrt. |
|
...
So melden Sie sich über Ihren Allplan Arbeitsplatz bei
|
...
den Allplan Webservices an Info |
---|
icon | false |
---|
title | Voraussetzungen: |
---|
| → Sie |
|
...
...
...
auf Image Added Login
|
...
...
Image Added ALLPLAN wird eingeblendet.
Geben Sie Ihre Zugangsdaten ein. Info |
---|
Hinweis: Als Zugangsdaten verwenden Sie entweder die im Zusammenhang mit Ihrer Registrierung bei Bimplus angegebene E-Mail-Adresse und das |
|
...
dort von Ihnen gewählte Passwort |
|
...
oder – sofern verfügbar – Ihre Allplan Connect Zugangsdaten. |
- Klicken Sie auf Login.
|
...
↑ zum Seitenanfang
Planungsdaten erstmalig hochladen
Nur der Inhaber eines Bimplus Kontos kann in seinem Konto neue Bimplus Projekte anlegen; ist also für das Allplan Projekt nicht bereits im Vorfeld ein Bimplus Projekt angelegt worden, muss der Kontoinhaber den ersten Upload aus diesem Allplan Projekt persönlich vornehmen, um währenddessen das Bimplus Projekt anlegen zu können.
Allplan Projekt mit Bimplus Projekt verknüpfen Anchor |
---|
| Allplan Projekt mit Bimplus Projekt verknüpfen |
---|
| Allplan Projekt mit Bimplus Projekt verknüpfen |
---|
|
Möchten Sie aus einem Allplan Projekt erstmalig Planungsdaten eines Fachmodells nach Bimplus hochladen, müssen Sie das Allplan Projekt zunächst mit dem entsprechenden Bimplus Projekt verknüpfen. Für die Verknüpfung verwenden Sie i.d.R. das vom zuständigen BIM-Koordinator für das Bauvorhaben bereits angelegte Bimplus Projekt. Alternativ kann das Bimplus Projekt auch während des Hochladens neu angelegt werden. Da jedoch nur der Eigentümer bzw. ein Administrator eines Bimplus Teams in seinem Team neue Bimplus Projekte anlegen darf, muss in diesem Fall der Teameigentümer oder ein Teamadministrator das erste Hochladen persönlich vornehmen. Info |
---|
Wichtig! Eine bestehende Verknüpfung zwischen Allplan Projekt und Bimplus Projekt kann nur dadurch geändert werden, dass das für das Allplan Projekt angelegte Bimplus Modell aus dem Bimplus Projekt gelöscht wird (siehe „Fachmodelle löschen“). |
So verknüpfen Sie ein Allplan Projekt mit einem Bimplus Projekt
|
...
Info |
---|
icon | false |
---|
title | Voraussetzungen: |
---|
| → |
|
...
...
bei den Allplan Webservices angemeldet (siehe „ |
|
...
...
Schalten Sie alle Konstruktionselemente des Projekts sichtbar, die nach Bimplus hochgeladen werden sollen. Wählen Sie dazu für die betreffenden Teilbilder den Status aktiv, aktiv im Hintergrund oder passiv; schalten Sie alle betreffenden Layer sichtbar, indem Sie zumindest den Layerstatus sichtbar, gesperrt einstellen.
|
...
...
auf Image Added Modell nach Bimplus hochladen (Aufgabenbereich Teamwork → Aufgabe Bimplus). Oder: Klicken Sie in der Palette Issue Manager auf Upload. Das Dialogfeld Modell nach Bimplus hochladen wird eingeblendet.
Nur, wenn Sie Mitglied
|
...
mehrerer Bimplus Teams sind: Wählen Sie im Bereich
|
...
...
von dem das Projekt bearbeitet werden soll.
Wenn das vorgesehene Bimplus Projekt
|
...
...
...
Projekt in der Tabelle Projekte
|
...
...
, in das die Planungsdaten eingespielt werden sollen (für Bimplus Projektadministratoren und Bimplus Projektbearbeiter erlaubt). Oder: Wenn das vorgesehene Bimplus Projekt
|
...
...
...
Projekt unterhalb der Tabelle Projekte auf Image Added Neues Bimplus Projekt erzeugen und geben Sie den Namen für das anzulegende Bimplus Projekt
|
...
an (ausschließlich für den Bimplus Teameigentümer oder einen Bimplus Teamadministrator erlaubt).
Klicken Sie im Bereich
|
...
Projekt unterhalb der Tabelle Modelle auf Image Modified Neues Bimplus Modell erzeugen und geben Sie den Namen für das anzulegende Bimplus Fachmodell an.
Klicken Sie auf
|
...
Hochladen. Das Allplan Projekt wird mit dem gewählten Bimplus Projekt verknüpft und die Planungsdaten werden
|
...
nach Bimplus hochgeladen.
Bestätigen Sie die
|
...
nach Abschluss des Prozesses angezeigte Meldung mit OK
|
...
...
Planungsstand auf Bimplus aktualisieren
werden folgende Informationen angezeigt:
Bimplus Team Name des Bimplus Teams, von dem das mit dem aktuellen Allplan Projekt verknüpfte Bimplus Projekt bearbeitet wird. Bimplus Projekt Bimplus Projekt, mit dem das aktuelle Allplan Projekt verknüpft ist. Bimplus Modell Name des Fachmodells, unter dem das aktuelle Allplan Projekt im Bimplus Projekt abgelegt ist.
↑ zum Seitenanfang Planungsstand eines Allplan Projekts auf Bimplus aktualisierenSobald ein Allplan Projekt mit einem Bimplus Projekt verknüpft ist, |
...
können Sie bei jedem erneuten |
...
Hochladen von Modelldaten aus diesem Allplan Projekt entscheiden, ob der |
...
in Bimplus vorhandene Planungsstand mit dem neuen Stand synchronisiert (d. h. lediglich die geänderten Elemente werden aktualisiert, die neu hinzugekommenen werden ergänzt) oder vollständig ersetzt werden soll. Zusätzlich können Sie wählen, ob dafür eine neue Revisionsfassung angelegt oder die bestehende Revision beibehalten wird. Alternativ kann für den aktuellen Upload auch ein völlig neues Fachmodell angelegt werden.
Im Dialogfeld Modell nach Bimplus hochladen haben Sie dafür folgende Einstellmöglichkeiten:
Image Added Mit dieser Einstellung werden nur die Objekte hochgeladen, die geändert oder neu hinzugefügt wurden. Gelöschte Objekte werden aus dem Modell entfernt. Die Revisionsnummer bleibt unverändert. Dieser Modus ist schneller als die Modi mit den Optionen Modelldaten ersetzen und Modell neu hochladen.
Image Added Mit dieser Einstellung werden nur die Objekte hochgeladen, die geändert oder neu hinzugefügt wurden. Dazu wird ein neuer Revisionsstand erzeugt, in den die unveränderten Objekte aus dem bisherigen Revisionsstand übernommen werden. Der bisherige Revisionsstand bleibt unverändert erhalten. Dieser Modus ist schneller als die Modi mit den Optionen Modelldaten ersetzen und Modell neu hochladen.
Image Added Mit dieser Einstellung werden alle Objekte des Modells vollständig neu hochgeladen. Sämtliche Objekte aus dem bisherigen Revisionsstand werden gelöscht. Issues, Spots, Kommentare usw. bleiben unverändert erhalten. Auch die Revisionsnummer bleibt unverändert.
Image Added Mit dieser Einstellung werden alle Objekte des Modells vollständig neu hochgeladen. Dazu wird ein neuer Revisionsstand erzeugt, in den Issues, Spots, Kommentare usw. unverändert übernommen werden. Der bisherige Revisionsstand bleibt unverändert erhalten.
Image Added Mit dieser Einstellung werden alle Objekte des aktuellen Modells vollständig neu hochgeladen. Sämtliche Objekte aus dem bisherigen Revisionsstand werden gelöscht. Issues, Spots, Kommentare usw. bleiben unverändert erhalten. Auch die Revisionsnummer bleibt unverändert. Verwenden Sie diese Option, wenn ein Upload z. B. aufgrund technischer Probleme unterbrochen wurde und wiederholt werden muss.
Info |
---|
Hinweis: Ein Wechseln des Bimplus Projekts oder Modells ist in dieser Phase nicht mehr möglich. |
So aktualisieren Sie einen Planungsstand bzw. erzeugen eine neue Revisionsfassung
Info |
---|
icon | false |
---|
title | Voraussetzungen: |
---|
|
|
...
...
bei den Allplan Webservices angemeldet (siehe „ |
|
...
...
Das geöffnete Allplan Projekt ist |
|
...
...
...
Schalten Sie alle Konstruktionselemente des Projekts sichtbar, die nach Bimplus hochgeladen werden sollen. Wählen Sie dazu für die betreffenden Teilbilder den Status aktiv, aktiv im Hintergrund oder passiv; schalten Sie alle betreffenden Layer sichtbar, indem Sie zumindest den Layerstatus sichtbar, gesperrt einstellen.
|
...
...
Nur, wenn Sie Mitglied in mehreren Bimplus Teams sind:
Wählen Sie im Bereich TEAM das Bimplus Team, in dem das Projekt bearbeitet werden soll.
...
auf Image Added Modell nach Bimplus hochladen (Aufgabenbereich Teamwork → Aufgabe Bimplus). Das Dialogfeld Modell nach Bimplus hochladen wird eingeblendet.
Wählen Sie im Bereich
|
...
Einstellung, ob das bestehende
|
...
Fachmodell mit den neuen Daten synchronisiert, vollständig überschrieben (jeweils mit/ohne neuem Revisionsstand) oder ein vollständig neues Fachmodell erzeugt werden soll (siehe oben).
Klicken Sie auf
|
...
Hochladen. Die Planungsdaten werden aus Allplan nach Bimplus hochgeladen.
- Bestätigen Sie die
|
...
- nach Abschluss des Prozesses angezeigte Meldung mit OK
|
...
↑ zum Seitenanfang
Sv translation |
---|
|
Signing in to Bimplus from Allplan Anchor |
---|
| Signing in to Bimplus from Allplan |
---|
| Signing in to Bimplus from Allplan |
---|
|
To upload data from Allplan directly to Bimplus, you must sign in to Bimplus from Allplan. You get the necessary details after registration with Bimplus. Info |
---|
Important! You sign in to Bimplus from Allplan independently of signing in to the BIMPLUS web portal although you use the same details (email address and password). Even if you have already signed in to the BIMPLUS web portal, you are not automatically signed in to Bimplus from Allplan and vice versa. |
To sign in to Bimplus from Allplan Info |
---|
icon | false |
---|
title | This is only possible if ... |
---|
| → You are a registered Bimplus participant (see "Ihre Bimplus Registrierung") → Allplan is running |
Click Image Added Login on the title bar of Allplan. You can see the Image Added BIMPLUS dialog box.
Enter your email address and password. Info |
---|
Note: Use the email address and password you specified when you registered with Bimplus. As an alternative, you can also use your details for signing in to Allplan Connect. |
- Click Login.
↑ Back to top Linking an Allplan project with a Bimplus project Anchor |
---|
| Linking an Allplan project with a Bimplus project |
---|
| Linking an Allplan project with a Bimplus project |
---|
|
If you want to upload planning data of a specialist model from an Allplan project to Bimplus for the first time, you must link the Allplan project with the corresponding Bimplus project first. Use the Bimplus project that was created by the BIM coordinator responsible for the construction project. As an alternative, you can also create a new Bimplus project while uploading data. However, only the owner or an administrator of a Bimplus team is authorized to create new Bimplus projects in the team. Therefore, the team owner or a team administrator must upload the data for the first time. Info |
---|
Important! Only by deleting the Bimplus model created for the Allplan project from the Bimplus project can you change the link between the Allplan project and the Bimplus project (see “Fachmodelle löschen”). |
To link an Allplan project with a Bimplus projectMake sure all design elements that you want to upload to Bimplus are visible in the project. To do this, check the status of the drawing files, which should be current, open in edit mode, or open in reference mode. Then check the status of the layers, which should be at least visible, frozen.
Click Image Added Upload Model to Bimplus (Teamwork task → Bimplus task area). Or: Click Upload in the Issue Manager palette. You can see the Upload Model to Bimplus dialog box.
Only if you are a member of several Bimplus teams: Go to the Team area and select the Bimplus team team who is to work on the project.
If the Bimplus project already exists: Go to the Project area - Projects table and select the Bimplus project to which you want to upload the planning data (possible for Bimplus project administrators and Bimplus project editors). Or: If the Bimplus project does not yet exist: Go to the Project area, click Image Added Create new Bimplus project under the Projects table, and enter a name for the new Bimplus project (this can be done only by the owner of the Bimplus team or an administrator of the Bimplus team).
Go to the Project area, click Image Added Create new Bimplus model under the Models table, and enter a name for the new Bimplus specialist model.
Click Upload. This links the Allplan project with the selected Bimplus project and uploads the planning data to Bimplus.
Click OK to confirm the message that appears when the upload is completed.
↑ Back to top - Select the Issue Manager palette (see “Showing the Issue Manager palette in Allplan”).
Click Image Added Settings at the bottom of the palette. The Settings for ... dialog box displays the following information:
Bimplus team Shows the name of the Bimplus team who is working on the Bimplus project that is linked with the current Allplan project. Bimplus project Shows the name of the Bimplus project that is linked with the current Allplan project. Bimplus model Shows the name of the specialist model under which the current Allplan project is stored in the Bimplus project.
↑ Back to top Updating the planning data of an Allplan project on BimplusAs soon as an Allplan project is linked with a Bimplus project, you can decide whether you want to synchronize the current data with the new data or to overwrite it completely (with or without creating a new revision). As an alternative you can create a new specialist model.
You can decide this each time you upload planning data from this Allplan project to Bimplus.
In the dialog box Upload Model to Bimplus you get the following options:
Image Added This option uploads only those objects, which have been changed or added new to the model data. Deleted objects will be removed from the model. The model revision remains the same. This way is usually faster than the Replace model data and Upload model again options.
Image Added This option uploads only those objects, which have been changed or added new to the model data. Deleted objects will be removed from the model. Along with that a new model revision is created. This way is usually faster than the Replace model data and Upload model again options.
Image Added This option uploads the new model data completely. All model data of the latest revision will be deleted. Issues, spots, comments etc. will remain untouched. The model revision remains the same.
Image Added This option uploads the new model data completely. All model data of the latest revision will be deleted. Issues, spots, comments etc. will remain untouched. Along with that a new model revision is created.
Image Added This option updates all model data. Issues, spots, comments etc. will remain untouched. The model revision also remains the same. Use this option to redo the upload if there has been some upload or internet trouble before.
Info |
---|
Note: You can change neither the Bimplus project nor the model in this phase. |
To update the planning data or create a new revisionMake sure all design elements that you want to upload to Bimplus are visible in the project. To do this, check the status of the drawing files, which should be current, open in edit mode, or open in reference mode. Then check the status of the layers, which should be at least visible, frozen.
Click Image Added Upload Model to Bimplus (Teamwork task → Bimplus task area). You can see the Upload Model to Bimplus dialog box.
Go to the Setting area and decide whether you want to synchronize or to overwrite the data of the existing specialist model (with or without creating a new revision) or to create a completly new specialist model (see above).
Click Upload. This uploads the planning data from Allplan to Bimplus.
- Click OK to confirm the message that appears when the upload is completed.
↑ Back to top |
...