Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Content imported from a Scroll Translations translation file.


Sv translation


Clash calculation identifies The program detects a clash if the value by which two objects overlap exceeds the value you entered for the overlap tolerance.



detect clashes

titleThis is only possible if ...

→  The Bimplus project is loaded in BIM Explorer (see “Bauwerksmodell in den BIM Explorer laden”)
→  You have the required rights (see "Rechte in Bimplus")

  1. Go to Click Image Added Clash detection on the left sidebar and click Image Removed Clash detection.

    The Clash managerManager palette opens appears on the left side.


    Tip: To hide the Clash managerManager palette, click Clash detection again.

  2. Use the Clash set list box at the top of the Clash Manager palette to select the object classes whose objects you want to check for clashes.

  3. You can change the overlap tolerance (default setting: 10 mm).

    Click Image Added Options next to the Clash set list box and select Image Added Edit.

  4. Enter the required value for the Tolerance (mm) in the Edit Clash Set palette and click SAVE.

    Clash calculation identifies

    Check and change the default setting for the overlap tolerance of the object class for which you want to calculate clashes.

    The program detects a clash as soon as the value by which objects overlap exceeds this value.

  5. Click Start clash calculation for the required structural level in the Clash Manager palette.


    If you want to the right of the required object classcheck the entire project for clashes, click Image Added Start clash calculation in the top row (= project name) of the tree structure.

    When the clash calculation is complete, you can see the Image Added Clashes row shows how many clashes have been detected for the object class in questionstructural level.


    Note: Clashes of each structural level are sorted by status in each object class: clashes detected (red), open clash tasks issues (yellow), and solved clash tasks issues (green). Click You can use  Show clashes to show and hide the clashes of each status in the model in full view.

↑ Back to top