4.5 Custom attribute service

Custom attribute Service

Bimplus DB

Create a free attribute group
Get all the free attribute groups
Get the info about a particular free attribute group
Update a particular free attribute group
Delete a particular free attribute group
Create a free attribute under a particular attribute group or as stand-alone
Get all the free attributes
Get all the free attributes under a attribute group
Get the info about a particular free attribute
Update a particular free attribute
Delete a particular free attribute
Create a unit
Get all the units
Get a particular unit
Update a particular unit
Delete a particular unit

Team DB

Important: All the APIs described in the Bimplus DB section applies to the Team DB as well. Replace the keyword "content" with the "team_slug" for working with the custom attributes & attribute groups in Team DB.

eg: Bimplus DB: https://api-stage.bimplus.net/v2/content/freeattributegroups. Similar call in Team DB will be https://api-stage.bimplus.net/v2/<team_slug>/freeattributegroups.

Team DB contains some additional APIs for working with attribute templates which are specified in this section.

Project Attribute Templates

Create new project attribute template in team
Get the list of existing project attribute templates in team
Get the info about a particular project attribute template
Update the project attribute template
Delete the project attribute template
Copy attribute templates from source to target project attribute template

Attribute Templates

Create an attribute template
Get all the attribute templates that belongs to a team
Get the info about a particular attribute template
Update a particular attribute template
Delete a particular attribute template

Element-type filter

Retrieve a list of element-types to which an attribute template can be assigned
Get the list of attribute templates that belongs to an element-type

Custom attribute Service

Using these services, custom property groups & its associated properties can be created.

Create a new custom group in Bimplus DB

Resource: content/freeattributegroups

URL: https://api-stage.bimplus.net/v2/content/freeattributegroups

Example: https://api-stage.bimplus.net/v2/content/freeattributegroups

JSON Structure:

Name	Mandatory / Optional	Type	Description
name	mandatory	string	Name of the attribute group
description	optional	string	Short description of the attribute group
parent	optional	string (guid)	Parent attribute group. If not specified, then the created group is a stand-alone group
children	will be ignored	json	Sub groups

POST

Creates a new custom attribute group. The created group could be either stand-alone ( parent not specified ), or created inside another group (the id of the parent has to be specified)

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
  "name": "TestGroup",
  "description": "Test group",
  "parent" : "6e57160e-5d5d-46a4-b4d3-b9e46d03ee75"
}

Status

Status: 201 Created

JSON

{
  "id": "da9c6db5-92fa-473d-9282-483c40907a95",
  "name": "TestGroup",
  "description": "Test group",
  "parent" : "6e57160e-5d5d-46a4-b4d3-b9e46d03ee75"
}

Get all the free attribute groups from the Bimplus DB

Resource: content/freeattributegroups

URL: https://api-stage.bimplus.net/v2/content/freeattributegroups

Example: https://api-stage.bimplus.net/v2/content/freeattributegroups

GET

Get all the free attribute groups from the Bimplus DB

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

 [
    {
        "id": "81a39304-9d4a-4e8d-826e-7736b9350562",
        "name": "ALLFA Attributes",
        "description": ""
    },
    {
        "id": "e6b44081-8983-4c07-b1a7-2c43bc199927",
        "name": "Allplan Attributes",
        "description": ""
    },
    {
        "id": "af12dda5-dafe-4b05-adeb-638617cc6907",
        "name": "BaseQuantities",
        "description": ""
    },
    {
        "children": [
            {
                "parent": "073245c3-6ed4-40a0-9146-ecd1eb111500",
                "id": "170820da-de29-437a-aa97-f7984a319890",
                "name": "Element",
                "description": "tabAttribbElement"
            },
            {
                "parent": "073245c3-6ed4-40a0-9146-ecd1eb111500",
                "id": "af946941-5a14-4c6a-be9f-424ca59b10b5",
                "name": "Element State",
                "description": "tabAttribbElementState"
            },
            {
                "parent": "073245c3-6ed4-40a0-9146-ecd1eb111500",
                "id": "0f6906f2-305d-4899-979a-6ce1e49af6a9",
                "name": "General",
                "description": "tabAttribGeneral"
            },
            {
                "parent": "073245c3-6ed4-40a0-9146-ecd1eb111500",
                "id": "66c2ba5e-8a70-40b8-9918-fccd1663f3bb",
                "name": "IFC",
                "description": "tabAttribIFC"
            }
        ],
        "id": "073245c3-6ed4-40a0-9146-ecd1eb111500",
        "name": "Bimplus Property Sets",
        "description": ""
    },
    {
        "id": "5d184904-fab5-4e53-9916-e9c20c4e31b7",
        "name": "Building Attribute",
        "description": ""
    },
    {
        "id": "1b567ec2-4a10-43ba-b791-45f288866808",
        "name": "CostPlanning",
        "description": "DIN276"
    },
    {
        "id": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
        "name": "Engineering Attributes",
        "description": ""
    },
    {
        "id": "1d9b883c-ecf5-4b91-b6a0-adea66432f6c",
        "name": "Identity Data",
        "description": ""
    },
    {
        "children": [
            {
                "parent": "99b99afa-abed-4a9e-99be-f2d3a2cb29de",
                "id": "6f496c13-e153-4ebd-8662-f00fe3e81e20",
                "name": "Pset_StairCommon",
                "description": ""
            }
        ],
        "id": "99b99afa-abed-4a9e-99be-f2d3a2cb29de",
        "name": "IFC",
        "description": ""
    },
    {
        "id": "cf83b687-b7ff-466b-9c15-853488455c5b",
        "name": "MEP Attribute",
        "description": ""
    },
    {
        "id": "969df3d1-5e79-4eea-aca9-5758d0026b39",
        "name": "Pset_[EType]Common",
        "description": ""
    },
    {
        "id": "431754db-32e6-4fc4-b252-a647b94aa5a8",
        "name": "Space Attributes",
        "description": ""
    }
]

Get the info about a particular free attribute group

Resource: content/freeattributegroups

URL: https://api-stage.bimplus.net/v2/content/freeattributegroups/<attributegroup_id>

Example: https://api-stage.bimplus.net/v2/content/freeattributegroups/b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8

GET

Get the info about a particular free attribute group and its sub-groups(hierarchy) It doesn't return the free attributes under this group.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

{
    "id": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
    "name": "Engineering Attributes",
    "description": ""
}

Update a particular free attribute group

Resource: content/freeattributegroups

URL: https://api-stage.bimplus.net/v2/content/freeattributegroups/<id>

Example: https://api-stage.bimplus.net/v2/content/freeattributegroups/b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8

JSON Structure:

Name	Mandatory / Optional	Type	Description
name	optional	string	Name of the attribute group
description	optional	string	Short description of the attribute group
id	will be ignored	string (guid)	Id of the free attribute group

PUT

Update a particular free attribute group. It is also possible to move the group as a sub-group of another group by changing its parent

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
    "name": "Engineering Attributes",
    "description": "updated description"
}

Status

Status: 200 OK

JSON

{
    "id": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
    "name": "Engineering Attributes",
    "description": "updated description"
}

Delete a particular free attribute group

Resource: content/freeattributegroups

URL: https://api-stage.bimplus.net/v2/content/freeattributegroups/<id>

Example: https://api-stage.bimplus.net/v2/content/freeattributegroups/b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8

DELETE

Deletes a specified attribute group.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

Create a free attribute under a particular attribute group or as stand-alone

Resource: content/freeattributes

URL: https://api-stage.bimplus.net/v2/content/freeattributes

Example: https://api-stage.bimplus.net/v2/content/freeattributes

JSON Structure:

Name	Mandatory / Optional	Type	Description
name	mandatory	string	Name of the attribute
description	optional	string	Short description of the attribute
type	mandatory	string	Type of free attributes. It could be one of the following: "int", "double", "string", "guid", "datetime", "binary", "boolean"
minvalue	optional	string(numbers)	Minimum value constraint of the attribute
maxvalue	optional	string(numbers)	Maximum value constraint of the attribute
defaultvalue	optional	string(numbers)	Default value of the attribute (if it's value is not specified)
decimal	optional	int	Number of decimals
unitid	optional	string(guid)	Id of the unit
optionalsymbol	optional	string(symbol)	Optional symbol
visible	optional	int	0 or 1. It determines whether the attribute should be visible
changeable	optional	int	0 or 1. It determines whether the attribute should be chnageable
controltype	optional	string	The control type (eg: "Checkbox", "Datepicker", "TextBox", "Enumeration", "Combobox")
enumDefinition	optional, mandatory for controltypes: "Enumeration", "Combobox"	string	Mandatory for controltype "Enumeration" List of items - pair of key,value separated with semicolon (";") Separator of key and value is character pipe ("\|") (eg: "0\|Undefined;1\|Extension;2\|Finish;3\|New building;4\|Reconstruction;5\|Building alteration") Mandatory for controltype "Combobox" List of items - values separated with character pipe ("\|") (eg: "Undefined\|Extension\|Finish\|New building\|Reconstruction\|Building alteration")
symbol	will be ignored	string	Symbol of the unit
parent	optional	string(guid)	Id of the attribute group. If not specified, then the created attribute is a stand-alone one.

POST

Creates a new custom attribute. The created attribute could be either stand-alone ( parent not specified ), or part of the custom attribute group (the id of the parent has to be specified)

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
 "name": "NewFreeAttribute",
 "description": "Test attribute",
 "type": "int",
 "minvalue" : "1",
 "maxvalue" : "1000",
 "defaultvalue" : "1",
 "decimal" : "0",
 "attribunitnameid" : "F99F40CF-DA64-4C4F-8434-CB90722BA485",
 "optionalsymbol" : "$",
 "visible" : "1",
 "changeable" : "1",
 "controltype" : "textbox",
 "parent" : "6e57160e-5d5d-46a4-b4d3-b9e46d03ee75"
}

Status

Status: 201 Created

JSON

{
  "freeattribtype": "int",
  "minvalue": "1",
  "maxvalue": "1000",
  "defaultvalue": "1",
  "decimal": 0,
  "attribunitnameid": "f99f40cf-da64-4c4f-8434-cb90722ba485", --> unitId (we already know it is attribute)
  "symbol": "mm",
  "optionalsymbol": "$",
  "visible": 1,
  "changeable": 1,
  "controltype": "textbox", --> The client should decide
  "id": "d6cac39a-4b6e-473f-813f-87f7fb92d3fe",
  "name": "NewFreeAttribute",
  "description": "Test attribute",
  "parent" : "6e57160e-5d5d-46a4-b4d3-b9e46d03ee75"
}

Get all the free attributes from the Bimplus DB

Resource: content/freeattributes

URL: https://api-stage.bimplus.net/v2/content/freeattributes

Example: https://api-stage.bimplus.net/v2/content/freeattributes?filter=name=Gross

Optional query parameters

Name	Type	Default value	Description
filter	string		When filter "name=Gross" is defined the API will return only free attributes which Name contains requested sub-string, e.g. if filter is "name=Gross" will be returned all free attributes which Name contains substring "Gross". Like GrossFloorArea, GrossWallArea, GrossWeight etc.

GET

Get all the free attributes from the Bimplus DB

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

 [
    {
        "parent": "5d184904-fab5-4e53-9916-e9c20c4e31b7",
        "type": null,
        "id": "8d3d9dd5-c998-465b-b13e-87901c90f3bc",
        "name": "heat transfer coefficient"
    },
    {
        "parent": "5d184904-fab5-4e53-9916-e9c20c4e31b7",
        "type": null,
        "id": "a6645047-39ee-4c87-9fc3-14ccca0c50ac",
        "name": "density"
    },
    {
        "parent": "431754db-32e6-4fc4-b252-a647b94aa5a8",
        "type": null,
        "id": "8807e401-6e3c-4536-88e1-e834d4de745d",
        "name": "floor area"
    },
    {
        "parent": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
        "type": null,
        "id": "b5850e23-b1df-4d4f-aae8-cee0d4bb06e6",
        "name": "bend radius"
    },
.....
]

Get all the free attributes under a attribute group

Resource: freeattributes

URL: https://api-stage.bimplus.net/v2/content/freeattributegroups/<attributegroup_id>/freeattributes

Example: https://api-stage.bimplus.net/v2/content/freeattributegroups/b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8/freeattributes

GET

Get all the free attributes under a attribute group

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

 [
    {
        "parent": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
        "type": "double",
        "minvalue": "0",
        "decimal": 2,
        "unitid": "f99f40cf-da64-4c4f-8434-cb90722ba485",
        "unit": "mm",
        "visible": 1,
        "changeable": 0,
        "controltype": "TextBox",
        "id": "b5850e23-b1df-4d4f-aae8-cee0d4bb06e6",
        "name": "bend radius",
        "description": "bend diameter for reinforcement bars"
    },
    {
        "parent": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
        "type": "double",
        "minvalue": "0",
        "defaultvalue": "5",
        "decimal": 2,
        "unitid": "f99f40cf-da64-4c4f-8434-cb90722ba485",
        "unit": "mm",
        "visible": 1,
        "changeable": 0,
        "controltype": "TextBox",
        "id": "c4623c1b-dfd3-4117-af37-091eaaff60bf",
        "name": "concrete cover",
        "description": "the least distance between the surface of embedded reinforcement and the outer surface of the concrete"
    },
    {
        "parent": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
        "type": "int",
        "decimal": 0,
        "visible": 1,
        "changeable": 0,
        "controltype": "TextBox",
        "id": "1c838554-3692-4ed4-afaf-989a9e59252b",
        "name": "SteelGrade",
        "description": "Kurzbez. der Stahlgüte @495@"
    },
    {
        "parent": "b03b5eb0-58f0-40a7-95fb-cb36b6f14cc8",
        "type": "int",
        "decimal": 0,
        "visible": 1,
        "changeable": 0,
        "controltype": "TextBox",
        "id": "d7ab92f4-ddf1-404b-8875-57b25b8fe66a",
        "name": "CrossSectionNumber",
        "description": "Nummer der Querschnittsreihe @496@"
    }
]

Get the info about a particular free attribute in Bimplus DB

Resource: content/freeattributes

URL: https://api-stage.bimplus.net/v2/content/freeattributes/<attribute_id>

Example: https://api-stage.bimplus.net/v2/content/freeattributes/c4623c1b-dfd3-4117-af37-091eaaff60bf

GET

Get the info about a particular free attribute in Bimplus DB

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

{
    "type": "double",
    "minvalue": "0",
    "defaultvalue": "5",
    "decimal": 2,
    "unitid": "f99f40cf-da64-4c4f-8434-cb90722ba485",
    "unit": "mm",
    "visible": 1,
    "changeable": 0,
    "controltype": "TextBox",
    "id": "c4623c1b-dfd3-4117-af37-091eaaff60bf",
    "name": "concrete cover",
    "description": "the least distance between the surface of embedded reinforcement and the outer surface of the concrete"
}

Update a particular free attribute in Bimplus DB

Resource: content/freeattributes

URL: https://api-stage.bimplus.net/v2/content/freeattributes/<attribute_id>

Example: https://api-stage.bimplus.net/v2/content/freeattributes/c4623c1b-dfd3-4117-af37-091eaaff60bf

JSON Structure:

Name	Mandatory / Optional	Type	Description
id	will be ignored	string(guid)	Id of the free attribute
name	optional	string	Name of the attribute
description	optional	string	Short description of the attribute
type	optional	string	Type of free attributes. It could be one of the following: "int", "double", "string", "guid", "datetime", "binary", "boolean"
minvalue	optional	string(numbers)	Minimum value constraint of the attribute
maxvalue	optional	string(numbers)	Maximum value constraint of the attribute
defaultvalue	optional	string(numbers)	Default value of the attribute (if it's value is not specified)
decimal	optional	int	Number of decimals
unitid	optional	string(guid)	Id of the unit
optionalsymbol	optional	string(symbol)	Optional symbol
visible	optional	int	0 or 1. It determines whether the attribute should be visible
changeable	optional	int	0 or 1. It determines whether the attribute should be chnageable
controltype	optional	string	The control type (eg: "Checkbox", "Datepicker", "TextBox", "Enumeration", "Combobox")
enumDefinition	optional, mandatory for controltypes: "Enumeration", "Combobox"	string	Mandatory for controltype "Enumeration" List of items - pair of key,value separated with semicolon (";") Separator of key and value is character pipe ("\|") (eg: "0\|Undefined;1\|Extension;2\|Finish;3\|New building;4\|Reconstruction;5\|Building alteration") Mandatory for controltype "Combobox" List of items - values separated with character pipe ("\|") (eg: "Undefined\|Extension\|Finish\|New building\|Reconstruction\|Building alteration")
symbol	will be ignored	string	Symbol of the unit
parent	optional	string(guid)	Id of the attribute group. It is also possible to move attribute to another group by changing its parent

PUT

Update a particular free attribute. It is also possible to move attribute to another group by changing its parent.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
    "type": "double",
    "minvalue": "0",
    "defaultvalue": "5",
    "decimal": 2,
    "unitid": "f99f40cf-da64-4c4f-8434-cb90722ba485",
    "unit": "mm",
    "visible": 1,
    "changeable": 0,
    "controltype": "TextBox",
    "name": "concrete cover",
    "description": "updated description"
}

Status

Status: 200 OK

JSON

{
    "type": "double",
    "minvalue": "0",
    "defaultvalue": "5",
    "decimal": 2,
    "unitid": "f99f40cf-da64-4c4f-8434-cb90722ba485",
    "unit": "mm",
    "visible": 1,
    "changeable": 0,
    "controltype": "TextBox",
    "id": "c4623c1b-dfd3-4117-af37-091eaaff60bf",
    "name": "concrete cover",
    "description": "updated description"
}

Delete a particular free attribute

Resource: content/freeattributes

URL: https://api-stage.bimplus.net/v2/content/freeattributes/<id>

Example: https://api-stage.bimplus.net/v2/content/freeattributes/c4623c1b-dfd3-4117-af37-091eaaff60bf

DELETE

Deletes a specific attribute.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

Create a new unit in Bimplus DB

Resource: content/units

URL: https://api-stage.bimplus.net/v2/content/units

Example: https://api-stage.bimplus.net/v2/content/units

JSON Structure of unit:

Name	Mandatory / Optional	Type	Description
name	mandatory	string	Name of the unit
description	optional	string	Short description of the unit
unit	mandatory	string	Symbol of the unit
contexUnitType	optional	string	Context unit type
baseunits	optional	array of jsons	List of base units

The "baseunits" property is an array of jsons with following definitions :

Name	Mandatory/Optional	Type	Description
baseunitid	optional	string(guid)	Base unit ID
usequence	optional	int	Unit sequence (default is 1)
upower	optional	int	Unit power (default is 1)
ufactor	optional	int	Unit factor (default is 1)

POST

Creates a new unit. An unit can be created fresh(base unit) or it can be derived from one or more base units ( defined by property "baseunits" ).

Here is a simple explanation of how to create a derived unit, e.g. gram per square meter "g/m2" :

json description

"baseunits": [
      {
        "baseunitid": "3b871b65-516e-4e7e-a35f-faa7501d5d0d", // ID of kilogram "kg"
        "usequence": 1,   // first in the sequence
        "ufactor": 0.001, // gram is 0.001 * kg
        "upower": 1       // no power used
      },
      {
        "baseunitid": "7be3452a-47f9-4fd8-bd94-ef6c967d684e",  // ID of meter "m"
        "usequence": 2,   // second in the sequence
        "ufactor": 1,     // 1 * meter
        "upower": -1      // meter ^-1
      }
    ]

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
  "name": "MyDerivedUnit",
  "description": "Example of derived unit",
  "symbol": "Sym",
  "baseunits" : [
      {
            "baseunitid": "3b871b65-516e-4e7e-a35f-faa7501d5d0d",
            "usequence": 1,
            "ufactor": 2,
            "upower": 3
      }
  ]
}

Status

Status: 201 Created

JSON

{
  "id": "9c75f2e7-bf66-4274-96a6-fb61ecb0e21a",
  "name": "MyDerivedUnit",
  "description": "Example of derived unit",
  "symbol": "Sym",
  "baseunits" : [
      {
            "baseunitid": "3b871b65-516e-4e7e-a35f-faa7501d5d0d",
            "usequence": 1,
            "ufactor": 2,
            "upower": 3
      }
  ]
}

Get all the units from Bimplus DB

Resource: content/units

URL: https://api-stage.bimplus.net/v2/content/units

Example: https://api-stage.bimplus.net/v2/content/units

Optional query parameters

Name	Type	Default value	Description
symbol	string		When symbol "kg" is defined the API returns all the unit with the specified symbol name. e.g. "https://api-stage.bimplus.net/v2/content/units?symbol=kg"

GET

Get all the units from Bimplus DB.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

[
    {
    "unit": "€",
    "contextUnitType": "CURRENCYUNIT",
    "id": "85fae1e9-5774-4bce-9831-911c8ff0d6b2",
    "name": "Currency",
    "description": "base unit for currency"
  },
  {
    "unit": "W/(m2*K)",
    "contextUnitType": "THERMALTRANSMITTANCEUNIT",
    "baseunits": [
      {
        "baseunitid": "cbd91636-49fa-4a4f-bdcc-03f27ca205f8",
        "usequence": 1,
        "ufactor": 1,
        "upower": -1
      }
    ],
    "id": "32ef9505-baa6-4598-b372-8e050aef57d4",
    "name": "Watt_per_square_meter_per_Kelvin",
    "description": "unit for heat transfer coefficient"
  },
  {
    "unit": "mm",
    "contextUnitType": "LENGTHUNIT",
    "baseunits": [
      {
        "baseunitid": "7be3452a-47f9-4fd8-bd94-ef6c967d684e",
        "usequence": 1,
        "ufactor": 0.001,
        "upower": 1
      }
    ],
    "id": "f99f40cf-da64-4c4f-8434-cb90722ba485",
    "name": "mm",
    "description": "unit for length in millimeter"
  },
......
]

Get the info about a particular unit in Bimplus DB

Resource: content/units

URL: https://api-stage.bimplus.net/v2/content/units/<unit_id>

Example: https://api-stage.bimplus.net/v2/content/units/3b871b65-516e-4e7e-a35f-faa7501d5d0d

GET

Get the info about a particular unit in Bimplus DB.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

{
    "unit": "mm",
    "contextUnitType": "LENGTHUNIT",
    "baseunits": [
      {
        "baseunitid": "7be3452a-47f9-4fd8-bd94-ef6c967d684e",
        "usequence": 1,
        "ufactor": 0.001,
        "upower": 1
      }
    ],
    "id": "f99f40cf-da64-4c4f-8434-cb90722ba485",
    "name": "mm",
    "description": "unit for length in millimeter"
  }

Update a particular unit

Resource: content/units

URL: https://api-stage.bimplus.net/v2/content/units/<id>

Example: https://api-stage.bimplus.net/v2/content/units/3b871b65-516e-4e7e-a35f-faa7501d5d0d

JSON Structure: See Create Unit

PUT

Update a particular unit.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
  "name": "MyDerivedUnit updated",
  "description": "Example of derived unit",
  "symbol": "Sym",
  "baseunits" : [
      {
            "baseunitid": "3b871b65-516e-4e7e-a35f-faa7501d5d0d",
            "usequence": 1,
            "ufactor": 2,
            "upower": 3
      }
  ]
}

Status

Status: 200 OK

JSON

{
  "id": "9c75f2e7-bf66-4274-96a6-fb61ecb0e21a",
  "name": "MyDerivedUnit updated",
  "description": "Example of derived unit",
  "symbol": "Sym",
  "baseunits" : [
      {
            "baseunitid": "3b871b65-516e-4e7e-a35f-faa7501d5d0d",
            "usequence": 1,
            "ufactor": 2,
            "upower": 3
      }
  ]
}

Delete a particular unit

Resource: content/units

URL: https://api-stage.bimplus.net/v2/content/units/<unit_id>

Example: https://api-stage.bimplus.net/v2/content/units/3b871b65-516e-4e7e-a35f-faa7501d5d0d

DELETE

Deletes the specific unit.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

Create new project attribute template in team

Resource: projectattributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/projectattributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/projectattributetemplates

JSON Structure:

Name	Mandatory / Optional	Type	Description
name	mandatory	string	Unique name of the project attribute template
description	optional	string	Short description of the project attribute template

POST

Creates a new project attribute template.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
  "name": "My project attribute template",
  "description": "Project attribute template for my team",
}

Status

Status: 201 Created

JSON

{
  "name": "My project attribute template",
  "description": "Project attribute template for my team",
  "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
}

Get the list of existing project attribute templates in team

Resource: projectattributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/projectattributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/projectattributetemplates

GET

Get all the project attribute templates that belongs to a team. Each team has at least one default project attribute template.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

[
  {
    "name": "Default",
    "description": "Default project attribute template",
    "id": "0149c4a8-4e84-4c40-bfdd-5dd63b109266"
  },
  {
    "name": "My project attribute template",
    "description": "Project attribute template for my team",  
    "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
  }
]

Get the info about a particular project attribute template

Resource: projectattributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/projectattributetemplates/<projectattributetemplates_id>

Example: https://api-stage.bimplus.net/v2/bimplus/projectattributetemplates/49d13da3-2acf-4f0b-b667-40fc0197585f

GET

Get the info about a particular project attribute template that belongs to a particular team.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

 {
    "name": "My project attribute template",
    "description": "Project attribute template for my team",  
    "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
 }

Update a particular project attribute template

Resource: projectattributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/projectattributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/projectattributetemplates/49d13da3-2acf-4f0b-b667-40fc0197585f

JSON Structure: See Create project attribute template

PUT

Update a particular project attribute template that belongs to a particular team.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
    "name": "My project attribute template2",
    "description": "Project attribute template for my team2",  
 }

Status

Status: 200 OK

JSON

{
  "name": "My project attribute template2",
  "description": "Project attribute template for my team2",
  "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
}

Delete the project attribute template

Resource: projectattributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/projectattributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/projectattributetemplates/49d13da3-2acf-4f0b-b667-40fc0197585f

DELETE

Deletes the specific project attribute template.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

Copy attribute templates from source to target project attribute template

Resource: projectattributetemplates/<targetprojectattributetemplates_id>/copyfrom

URL: https://api-stage.bimplus.net/v2/<team_slug>/projectattributetemplates/<targetprojectattributetemplates_id>/copyfrom

Example:https://api-stage.bimplus.net/v2/bimplus/projectattributetemplates/49d13da3-2acf-4f0b-b667-40fc0197585f/copyfrom

JSON Structure:

Name	Mandatory / Optional	Type	Description
name	will be ignored	string	Name of the project attribute template
description	will be ignored	string	Description of the project attribute template
id	mandatory	string(guid)	Unique guid of the source project attribute template

PUT

Updates the specified target project attribute template with all attribute templates from source project attribute template.
When project attribute template id is missing will be used internally default project attribute template (Guid as "0149c4a8-4e84-4c40-bfdd-5dd63b109266") as a source project attribute template.

Note:
In case when some attribute templates are already assigned to target project attribute template and the same attribute template is present also in source project attribute template,
in such case attribute templates will be added to target project attribute template.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
    "name": "Default",
    "description": "Default project attribute template",
    "id": "0149c4a8-4e84-4c40-bfdd-5dd63b109266"
}

Status

Status: 200 OK

JSON

{
  "name": "My project attribute template",
  "description": "Project attribute template for my team",
  "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
}

Create an attribute template

Resource: attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/attributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/attributetemplates

JSON Structure:

Name	Mandatory / Optional	Type	Description
name	mandatory	string	Name of the attribute template
description	optional	string	Short description of the attribute template
projectAttributeTemplate	mandatory	string(guid)	Guid of the project attribute template
freeattributes	optional	JSON Array	List of free attributes directly under this template ( in create, only IDs of those attributes are required ) The List defines also automatically the orderNumber of the attributes inside of the template
elementtypes	mandatory	JSON Array	List of element type ids to which the template will be assigned. At least one element type is mandatory.
groups	optional	JSON Array	Sub-groups of attributes
created	will be ignored	string ( Date )	Creation date
createdBy	will be ignored	JSON ( User )	User who created the template
changed	will be ignored	string ( Date )	Date of last modification
changedBy	will be ignored	JSON ( User )	User who did the modification
orderNumber	optional	integer	will be used for ordering current attribute template to existing templates 0 -> this template will be added at the end of all templates. 1...n -> this template will be added at a fixed position; all other templates will be reordered automatically

The property "groups" has following JSON structure:

Name	Mandatory / Optional	Type	Description
name	mandatory	string	Name of the group
description	optional	string	Group description
freeattributes	optional	Json Array	List of free attributes directly under this group ( in create, only IDs of those attributes are required )
groups	optional	Json Array	List of subgroups of this group.

POST

Creates a new attribute template using free attributes & element types. For both free attributes and element types, it is enough to specify just their IDs in the request, the rest of the data will be loaded automatically from the database, and returned in the response.

Free attributes may be directly under the template, or you could use the "groups" property to create a logical hierarchy of attributes in groups.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
  "name": "My attribute template",
  "description": "Attribute template for Walls",
  "elementtypes": [
    {
      "id": "10074EEF-9418-4D64-9C6D-23932835A7F1"
    }
  ],
  "groups": [
    {
      "name": "Group 1",
      "description": "One of the top groups",
      "freeattributes": [
        {
          "id": "06124729-2778-4c16-98d1-9d89e760b195"
        }
      ]
    },
    {
      "name": "Group 2",
      "groups": [
        {
          "name": "SubGroup 3",
          "description": "Some sub group",
          "freeattributes": [
            {
              "id": "665b0658-e64f-4ce2-91b2-c5d152b177d5"
            }
          ]
        }
      ]
    }
  ],
  "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285"
}

Status

Status: 201 Created

JSON

{
  "name": "My attribute template",
  "description": "Attribute template for Walls",
  "elementtypes": [
    {
      "type": "Wall",
      "category": "/1/10/1/",
      "name": "ID_ArchWall",
      "ifcType": "ID_IFCWallStandardCase",
      "id": "10074eef-9418-4d64-9c6d-23932835a7f1"
    }
  ],
  "groups": [
    {
      "id": "960005e0-c24b-44c1-a4e7-cc2d7316c1f3",
      "name": "Group 1",
      "description": "One of the top groups",
      "freeattributes": [
        {
          "type": "string",
          "decimal": 0,
          "changeable": 0,
          "id": "06124729-2778-4c16-98d1-9d89e760b195",
          "name": "FireRating",
          "description": ""
        }
      ]
    },
    {
      "id": "0f2ff22f-070d-4bbd-a67d-d2f47f1737ee",
      "name": "Group 2",
      "groups": [
        {
          "id": "e3a56ecd-3c75-40d3-8de7-fdaa1ba2eb4f",
          "name": "SubGroup 3",
          "description": "Some sub group",
          "freeattributes": [
            {
              "type": "int",
              "decimal": 0,
              "changeable": 0,
              "id": "665b0658-e64f-4ce2-91b2-c5d152b177d5",
              "name": "LoadBearing",
              "description": ""
            }
          ]
        }
      ]
    }
  ],
  "created": "2016-02-12T07:21:33.43",
  "createdby": {
    "id": "7c555899-5a5f-44d1-930e-284930678bed",
    "email": "test@nemetschek.com"
  },
  "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285",
  "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
}

Get all the attribute templates that belongs to a team

Resource: attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/attributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/attributetemplates

GET

Get all the attribute templates that belongs to a team.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

[
  {
    "name": "My attribute template",
    "description": "Attribute template for Walls",
    "elementtypes": [
      {
        "type": "Wall",
        "category": "/1/10/1/",
        "name": "ID_ArchWall",
        "ifcType": "ID_IFCWallStandardCase",
        "id": "10074eef-9418-4d64-9c6d-23932835a7f1"
      }
    ],
    "groups": [
      {
        "id": "960005e0-c24b-44c1-a4e7-cc2d7316c1f3",
        "name": "Group 1",
        "description": "One of the top groups",
        "freeattributes": [
          {
            "type": "string",
            "decimal": 0,
            "changeable": 0,
            "id": "06124729-2778-4c16-98d1-9d89e760b195",
            "name": "FireRating",
            "description": ""
          }
        ]
      },
      {
        "id": "0f2ff22f-070d-4bbd-a67d-d2f47f1737ee",
        "name": "Group 2",
        "groups": [
          {
            "id": "e3a56ecd-3c75-40d3-8de7-fdaa1ba2eb4f",
            "name": "SubGroup 3",
            "description": "Some sub group",
            "freeattributes": [
              {
                "type": "int",
                "decimal": 0,
                "changeable": 0,
                "id": "665b0658-e64f-4ce2-91b2-c5d152b177d5",
                "name": "LoadBearing",
                "description": ""
              }
            ]
          }
        ]
      }
    ],
    "created": "2016-02-12T07:21:33.43",
    "createdby": {
      "id": "7c555899-5a5f-44d1-930e-284930678bed",
      "email": "test@nemetschek.com"
    },
    "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285",
    "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
  },
  ...
]

Get the info about a particular attribute template

Resource: attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/attributetemplates/<template_id>

Example: https://api-stage.bimplus.net/v2/bimplus/attributetemplates/3e5c0964-8f28-469b-b176-bcfad48f2eef

GET

Get the info about a particular attribute template that belongs to a particular team.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

{
  "name": "My attribute template",
  "description": "Attribute template for Walls",
  "elementtypes": [
    {
      "type": "Wall",
      "category": "/1/10/1/",
      "name": "ID_ArchWall",
      "ifcType": "ID_IFCWallStandardCase",
      "id": "10074eef-9418-4d64-9c6d-23932835a7f1"
    }
  ],
  "groups": [
    {
      "id": "960005e0-c24b-44c1-a4e7-cc2d7316c1f3",
      "name": "Group 1",
      "description": "One of the top groups",
      "freeattributes": [
        {
          "type": "string",
          "decimal": 0,
          "changeable": 0,
          "id": "06124729-2778-4c16-98d1-9d89e760b195",
          "name": "FireRating",
          "description": ""
        }
      ]
    },
    {
      "id": "0f2ff22f-070d-4bbd-a67d-d2f47f1737ee",
      "name": "Group 2",
      "groups": [
        {
          "id": "e3a56ecd-3c75-40d3-8de7-fdaa1ba2eb4f",
          "name": "SubGroup 3",
          "description": "Some sub group",
          "freeattributes": [
            {
              "type": "int",
              "decimal": 0,
              "changeable": 0,
              "id": "665b0658-e64f-4ce2-91b2-c5d152b177d5",
              "name": "LoadBearing",
              "description": ""
            }
          ]
        }
      ]
    }
  ],
  "created": "2016-02-12T07:21:33.43",
  "createdby": {
    "id": "7c555899-5a5f-44d1-930e-284930678bed",
    "email": "test@nemetschek.com"
  },
  "changed": "2016-02-12T07:22:51.02",
  "changedby": {
    "id": "7c555899-5a5f-44d1-930e-284930678bed",
    "email": "test@nemetschek.com"
  },
  "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285",
  "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
}

Update a particular attribute template

Resource: attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/attributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/attributetemplates/3e5c0964-8f28-469b-b176-bcfad48f2eef

JSON Structure: See Create attribute template

PUT

Update a particular attribute template that belongs to a particular team.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

JSON

{
  "name": "My attribute template updated",
  "description": "Attribute template for Walls",
  "elementtypes": [
    {
      "id": "10074EEF-9418-4D64-9C6D-23932835A7F1"
    }
  ],
  "groups": [
    {
      "name": "Group 1",
      "description": "One of the top groups",
      "freeattributes": [
        {
          "id": "06124729-2778-4c16-98d1-9d89e760b195"
        }
      ]
    },
    {
      "name": "Group 2",
      "groups": [
        {
          "name": "SubGroup 3",
          "description": "Some sub group",
          "freeattributes": [
            {
              "id": "665b0658-e64f-4ce2-91b2-c5d152b177d5"
            }
          ]
        }
      ]
    }
  ],
  "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285",
}

Status

Status: 200 OK

JSON

{
  "name": "My attribute template updated",
  "description": "Attribute template for Walls",
  "elementtypes": [
    {
      "type": "Wall",
      "category": "/1/10/1/",
      "name": "ID_ArchWall",
      "ifcType": "ID_IFCWallStandardCase",
      "id": "10074eef-9418-4d64-9c6d-23932835a7f1"
    }
  ],
  "groups": [
    {
      "id": "960005e0-c24b-44c1-a4e7-cc2d7316c1f3",
      "name": "Group 1",
      "description": "One of the top groups",
      "freeattributes": [
        {
          "type": "string",
          "decimal": 0,
          "changeable": 0,
          "id": "06124729-2778-4c16-98d1-9d89e760b195",
          "name": "FireRating",
          "description": ""
        }
      ]
    },
    {
      "id": "0f2ff22f-070d-4bbd-a67d-d2f47f1737ee",
      "name": "Group 2",
      "groups": [
        {
          "id": "e3a56ecd-3c75-40d3-8de7-fdaa1ba2eb4f",
          "name": "SubGroup 3",
          "description": "Some sub group",
          "freeattributes": [
            {
              "type": "int",
              "decimal": 0,
              "changeable": 0,
              "id": "665b0658-e64f-4ce2-91b2-c5d152b177d5",
              "name": "LoadBearing",
              "description": ""
            }
          ]
        }
      ]
    }
  ],
  "created": "2016-02-12T07:21:33.43",
  "createdby": {
    "id": "7c555899-5a5f-44d1-930e-284930678bed",
    "email": "test@nemetschek.com"
  },
  "changed": "2016-02-12T07:22:51.02",
  "changedby": {
    "id": "7c555899-5a5f-44d1-930e-284930678bed",
    "email": "test@nemetschek.com"
  },
  "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285",
  "id": "49d13da3-2acf-4f0b-b667-40fc0197585f"
}

Delete a particular attribute template

Resource: attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/attributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/attributetemplates/3e5c0964-8f28-469b-b176-bcfad48f2eef

DELETE

Deletes the specific attribute template.

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

Retrieve a list of element-types to which an attribute template can be assigned

Resource: element-types/attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/element-types/attributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/element-types/attributetemplates?filter=type=Wall

Filter: When filter is defined the API will return only element-types which Type contains requested sub-string, e.g. if filter is "type=Wall" will be returned all element-types which Type contains substring "Wall". Like Wall, CurtainWall, WallCovering, StructuralAnalysisWall, etc.

Optional query parameters

Name

Type

Default value

Description

filter

string

When filter "type=Wall" is defined the API will return only element-types which Type contains requested sub-string,

e.g. if filter is "type=Wall" will be returned all element-types which Type contains substring "Wall".

Like Wall, CurtainWall, WallCovering, StructuralAnalysisWall, etc.

GET

Retrieve a list of element-types to which an attribute template can be assigned. Please remember that attribute template can't be assigned to all element-types (i.e v2/<team_slug>/element-types)

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

 [
    {
        "type": "BuildingObject",
        "category": "/1/",
        "name": "ID_BuildingModel",
        "ifcType": null,
        "id": "0f106af0-a919-44c5-b211-15bd5ef620b6"
    },
    {
        "type": "BuildingElement",
        "category": "/1/10/",
        "name": "ID_Bauteilobjekte",
        "ifcType": null,
        "id": "34c606d8-77aa-4c1c-a19d-cf9cf222e6c5"
    },
    {
        "type": "Wall",
        "category": "/1/10/1/",
        "name": "ID_ArchWall",
        "ifcType": "ID_IFCWallStandardCase",
        "id": "10074eef-9418-4d64-9c6d-23932835a7f1"
    },
.....]

Get the list of attribute templates that belongs to an element-type

Resource: element-types/<element_id>/attributetemplates

URL: https://api-stage.bimplus.net/v2/<team_slug>/element-types/<element_id>/attributetemplates

Example: https://api-stage.bimplus.net/v2/bimplus/element-types/10074eef-9418-4d64-9c6d-23932835a7f1/attributetemplates

Optional query parameters

Name

Type

Default value

Description

attributes

string (bool)

false

By default the response doesn't include the free attribute list in returned attribute templates.

To include the free attribute list, please use the query parameter attributes=true.

e.g. https://api-stage.bimplus.net/v2/bimplus/element-types/10074eef-9418-4d64-9c6d-23932835a7f1/attributetemplates?attributes=true

projectattributetemplate

string (Guid)

undefined

By default in the response are included attribute templates from all project attribute templates defined in team which belongs to requested element-type.

To be included only attribute templates which belongs to certain project attribute template, please use the projectAttributeTemplate query parameter.

e.g. https://api-stage.bimplus.net/v2/bimplus/element-types/10074eef-9418-4d64-9c6d-23932835a7f1/attributetemplates?projectattributetemplate=bb6ccf01-75f1-4581-842a-95bbe71f7285

GET

Get all the free attribute groups from the Bimplus DB

Headers

Authorization: BimPlus 9c1874a62c974dcfa75e0132c423a088
Content-Type: application/json

Status

Status: 200 OK

JSON

 [
    {
        "name": "Element (default Property set)",
        "description": "",
        "created": "2015-10-29T00:13:30.393",
        "createdby": {
            "id": "71e0ac3b-fa49-e540-ac2f-8caff3dd72ed",
            "email": "jayaraj.purushothaman@gmail.com"
        },
        "changed": "2015-10-29T00:13:30.393",
        "changedby": {
            "id": "71e0ac3b-fa49-e540-ac2f-8caff3dd72ed",
            "email": "jayaraj.purushothaman@gmail.com"
        },
        "projectAttributeTemplate": "bb6ccf01-75f1-4581-842a-95bbe71f7285",
        "id": "3f025e20-1c11-42b1-ad3b-0f6cc6fc03af"
    }
]

projectattributetemplate

Math Editor

Space shortcuts

Page tree

Custom attribute Service

Bimplus DB

Team DB

Custom attribute Service

Create a new custom group in Bimplus DB

Get all the free attribute groups from the Bimplus DB

Get the info about a particular free attribute group

Update a particular free attribute group

Delete a particular free attribute group

Create a free attribute under a particular attribute group or as stand-alone

Get all the free attributes from the Bimplus DB

Get all the free attributes under a attribute group

Get the info about a particular free attribute in Bimplus DB

Update a particular free attribute in Bimplus DB

Delete a particular free attribute

Create a new unit in Bimplus DB

Get all the units from Bimplus DB

Get the info about a particular unit in Bimplus DB

Update a particular unit

Delete a particular unit

Create new project attribute template in team

Get the list of existing project attribute templates in team

Get the info about a particular project attribute template

Update a particular project attribute template

Delete the project attribute template

Copy attribute templates from source to target project attribute template

Create an attribute template

Get all the attribute templates that belongs to a team

Get the info about a particular attribute template

Update a particular attribute template

Delete a particular attribute template

Retrieve a list of element-types to which an attribute template can be assigned

Get the list of attribute templates that belongs to an element-type